Reading comprehension: the six question types and how to beat each
Short answer: the Reading Comprehension part has 36 multiple-choice questions in 51 minutes. You read passages and answer questions about main idea, stated details, word meaning, inference, author's purpose and "which is NOT true." Every correct answer is supported by the passage. The most common mistake is picking an answer that sounds right from experience but is not stated.
Below: the six question types with a method for each, one worked passage with two questions, and a pacing plan for the 51 minutes.
What does the reading section test?
The Electrical Training Alliance describes it as a test that "measures your ability to obtain information from written passages" on its sample test page. Apprentices read code books, manufacturer instructions and safety procedures for a living, so the skill is precise reading: what does this text actually say, and what does it not say?
What are the question types?
| Type | Typical stem | How to answer |
|---|---|---|
| Main idea | "The main idea of the passage is that..." | Pick the choice that covers the whole passage, not one paragraph. Too narrow and too broad are both wrong. |
| Stated detail | "According to the passage..." | Find the sentence. The answer is a close paraphrase of it. |
| Word in context | "The word 'cascading' most nearly means..." | Replace the word with each choice and reread the sentence. The dictionary meaning is not always the right one. |
| Inference | "It can be inferred that..." | The answer must follow from the text with one small step. If you need outside facts, it is wrong. |
| Purpose | "The author mentions X primarily to..." | Ask why that sentence is there: an example, a contrast, a warning or a conclusion. |
| NOT / EXCEPT | "Which is NOT true, according to the passage?" | Check each choice against the text and cross out the true ones. Slow down here: these cause the most careless errors. |
A worked example
This passage is our own and shorter than a real one. Read it, answer the two questions, then check the reasoning.
Ground-fault circuit interrupters, or GFCIs, protect people rather than wiring. A standard breaker trips when current rises high enough to overheat a conductor, which can take far more current than it takes to injure a person. A GFCI instead compares the current leaving on the hot conductor with the current returning on the neutral. If the two differ by a few thousandths of an amp, some current is taking another path, possibly through a person, and the device opens the circuit within a fraction of a second. This is why GFCIs are required in damp locations such as bathrooms and outdoor outlets. A GFCI does not replace a breaker: a short circuit between hot and neutral leaves the two currents equal, so the GFCI does not see it, and the breaker must still clear the fault.
1. According to the passage, a GFCI trips when:
A. current rises high enough to overheat the wiring
B. the hot and neutral currents differ by a small amount
C. a short circuit occurs between hot and neutral
D. moisture is detected in the outlet
E. the breaker fails to trip
Answer: B. The passage says it compares the two currents and opens the circuit if they differ by a few thousandths of an amp. A describes a standard breaker. C is the exact case the passage says a GFCI does not see. D sounds reasonable, but the passage only says GFCIs are required in damp places, not that they sense moisture.
2. It can be inferred from the passage that a building with GFCIs:
A. no longer needs circuit breakers
B. can never have an electrical fire
C. still needs breakers to protect against short circuits
D. should only use GFCIs outdoors
E. uses less electricity
Answer: C. The last sentence says the GFCI does not see a hot-to-neutral short and "the breaker must still clear the fault." That is one small step from the text. A contradicts it. B, D and E need claims the passage never makes.
What is the best reading method under time pressure?
- Skim the question stems for the passage (ten seconds). Skip the answer choices for now.
- Read the passage once at a normal pace. Note in a word or two on scrap paper what each paragraph does: "defines," "compares," "warns."
- Answer detail questions first, going back to the exact line each time. Do not answer from memory.
- Answer main idea and purpose last, when you have the whole passage in your head.
- Eliminate, then choose. Cross out choices that are too extreme ("always," "never"), off-topic, or true only in real life.
How should you pace 36 questions in 51 minutes?
Passages usually carry several questions each, so budget by passage rather than by question. If a passage has six questions, give it about 8 minutes: 3 to read and 5 to answer. Check the clock after each passage. If you are behind, answer the detail questions on the next passage and guess the rest rather than leaving a later passage untouched, because every question is worth the same.
How can you improve reading speed before the test?
- Read one technical article a day (a trade magazine, an equipment manual, a safety bulletin) and write its main idea in one sentence.
- Time yourself on every practice passage and write the time down, so you can see whether you are getting faster.
- Review every wrong answer and name the trap: outside knowledge, too extreme, too narrow, or misread NOT.
Practice with full-length passages: the second half of the free practice test is 36 reading questions with explanations.
Take the practice testFrequently asked questions
How long are the reading passages?
Longer than most free samples. The Electrical Training Alliance notes that its own sample passage is shorter than those on the actual test. Expect several paragraphs per passage, each followed by a group of questions.
Do I need electrical knowledge for the reading section?
No. Passages may be about technical or work topics, but every answer is in the text. Outside knowledge can even hurt you if it pulls you toward an answer the passage does not support.
Should I read the questions before the passage?
Skim the question stems first (not the answer choices), then read the passage once at a steady pace. You will notice the lines that matter as you read, and you avoid rereading the whole text for every question.
Is the reading section easier than the math?
Many applicants find it easier, but it is not free points. The 51-minute limit for 36 questions leaves about 85 seconds per question including reading time, so slow readers run short.
Sources
- Electrical Training Alliance, sample test questions (section description; sample passage shorter than the real test)
- Electrical Training Alliance, The Application Process (36 items, 51 minutes)