How it works: 69 questions in the same split as the real test, 33 algebra and functions followed by 36 reading comprehension. Choose exam mode for a 97-minute timer and a score at the end, or study mode to see the right answer and the working after each question. No sign-up, nothing to install, and use scrap paper, not a calculator.
Part 1: Algebra and functions, questions 1 to 33
Question 1
Solve for x: 5x − 8 = 3x + 14
Show answer and working
Answer: C. 11. Subtract 3x: 2x − 8 = 14. Add 8: 2x = 22. Divide by 2: x = 11.
Question 2
Solve for y: (y / 4) + 3 = 10
Show answer and working
Answer: C. 28. Subtract 3: y/4 = 7. Multiply by 4: y = 28.
Question 3
If 2(3x − 4) = 4x + 6, what is x?
Show answer and working
Answer: C. 7. Expand: 6x − 8 = 4x + 6. Subtract 4x: 2x − 8 = 6. So 2x = 14 and x = 7.
Question 4
Which value of x satisfies 4 − 3x ≤ −11?
Show answer and working
Answer: B. x ≥ 5. Subtract 4: −3x ≤ −15. Divide by −3 and flip the sign: x ≥ 5.
Answer: B. (x + 7)(x − 7). A difference of squares a² − b² factors to (a + b)(a − b). Here b = 7.
Question 14
Solve: x² − 7x + 12 = 0
Show answer and working
Answer: A. x = 3 or x = 4. Two numbers that multiply to 12 and add to −7 are −3 and −4, so (x − 3)(x − 4) = 0.
Question 15
Simplify: (x³)(x⁴)
Show answer and working
Answer: A. x&sup7;. When you multiply powers with the same base, add the exponents: 3 + 4 = 7.
Question 16
Simplify: (2a²)³
Show answer and working
Answer: B. 8a⁶. Cube both parts: 2³ = 8 and (a²)³ = a⁶.
Question 17
What is 2⁻³?
Show answer and working
Answer: C. 1/8. A negative exponent means a reciprocal: 2⁻³ = 1 / 2³ = 1/8.
Question 18
Simplify: √72
Show answer and working
Answer: A. 6√2. 72 = 36 × 2, and √36 = 6, so √72 = 6√2.
Question 19
Solve the system: x + y = 10 and x − y = 4
Show answer and working
Answer: A. x = 7, y = 3. Add the equations: 2x = 14, so x = 7. Then y = 10 − 7 = 3.
Question 20
Solve the system: 2x + y = 11 and y = x + 2
Show answer and working
Answer: A. x = 3, y = 5. Substitute y: 2x + (x + 2) = 11, so 3x = 9 and x = 3. Then y = 5.
Question 21
What is the slope of the line y = −4x + 9?
Show answer and working
Answer: B. −4. In y = mx + b, m is the slope. Here m = −4. The 9 is the y-intercept.
Question 22
A line passes through (1, 2) and (4, 11). What is its equation?
Show answer and working
Answer: A. y = 3x − 1. Slope = (11 − 2) / (4 − 1) = 3. Then 2 = 3(1) + b, so b = −1. Check: 3(4) − 1 = 11.
Question 23
Ohm's law says V = IR. If V = 120 and R = 15, what is I?
Show answer and working
Answer: B. 8. Divide both sides by R: I = V / R = 120 / 15 = 8.
Question 24
Solve for R in the formula P = V² / R.
Show answer and working
Answer: C. R = V² / P. Multiply both sides by R: PR = V². Divide by P: R = V² / P.
Question 25
Two resistors in parallel have total resistance R = (R1 × R2) / (R1 + R2). What is R when R1 = 6 and R2 = 12?
Show answer and working
Answer: A. 4. Product over sum: (6 × 12) / (6 + 12) = 72 / 18 = 4. The total is always smaller than the smallest resistor, which rules out 9, 18 and 72.
Question 26
A spool holds 250 ft of wire. A crew uses 35 ft per outlet. After wiring 6 outlets, how much wire is left?
Show answer and working
Answer: A. 40 ft. 6 × 35 = 210 ft used. 250 − 210 = 40 ft left.
Question 27
A conduit run is 3/4 of the way done after 18 hours of work. At the same rate, how many total hours will the full run take?
Show answer and working
Answer: C. 24. 18 hours is 3/4 of the job, so 1/4 is 6 hours and the whole job is 24 hours.
Question 28
Simplify: (6x² + 9x) / 3x, where x ≠ 0
Show answer and working
Answer: A. 2x + 3. Divide each term by 3x: 6x²/3x = 2x and 9x/3x = 3.
Question 29
If 3^(x + 1) = 81, what is x?
Show answer and working
Answer: B. 3. 81 = 3⁴, so x + 1 = 4 and x = 3.
Question 30
If h(t) = 5t + 2, for what value of t does h(t) = 37?
Show answer and working
Answer: C. 7. Set 5t + 2 = 37. Then 5t = 35 and t = 7.
Question 31
What is the value of |−9 + 4| − |3 − 8|?
Show answer and working
Answer: A. 0. |−5| = 5 and |−5| = 5. 5 − 5 = 0.
Question 32
Which of these is equivalent to 0.375?
Show answer and working
Answer: A. 3/8. 3 ÷ 8 = 0.375. Quick check: 1/8 = 0.125, and 3 × 0.125 = 0.375.
Question 33
Evaluate 2x² − xy + y when x = 3 and y = −2.
Show answer and working
Answer: C. 22. 2(9) = 18. −xy = −(3)(−2) = +6. Then + y = −2. Total: 18 + 6 − 2 = 22.
Part 2: Reading comprehension, questions 34 to 69
Passage 1: read it, then answer questions 34 to 39.
Ohm's Law is the foundational relationship in electrical theory, describing how voltage, current, and resistance interact in a circuit. It states that the current through a conductor between two points is directly proportional to the voltage across those points and inversely proportional to the resistance between them. Expressed as a formula, V equals I times R, where V is voltage in volts, I is current in amperes, and R is resistance in ohms. A practical consequence is that if resistance stays fixed, doubling the voltage doubles the current. Likewise, with fixed voltage, doubling the resistance halves the current. Apprentices use this relationship constantly. When sizing a heater element, a technician who knows the supply voltage and the element's resistance can calculate the expected current draw and confirm the circuit and breaker are rated to handle it. Ohm's Law also underlies troubleshooting: a higher-than-expected current reading often points to lower-than-expected resistance, which can indicate a partial short or degraded insulation. The relationship assumes temperature remains fairly constant, because the resistance of most conductors rises as they heat up, which is why a lamp filament draws a large inrush current the instant it is switched on before settling to a lower steady value.
Question 34
The word 'inversely' in the phrase 'inversely proportional to the resistance' most nearly means:
Show answer and working
Answer: A. Changing in the opposite direction, so when one value goes up the other goes down.. Inverse proportion means one value rises while the other falls.
Question 35
Which of the following is NOT consistent with the passage?
Show answer and working
Answer: A. A lamp filament draws its largest current after it has been on for several minutes and is fully heated.. The passage says the inrush current comes at switch-on, before the filament heats up.
Question 36
In the formula V = I times R, the letter I represents:
Show answer and working
Answer: D. Current in amperes.. I is current measured in amperes.
Question 37
The main idea of the passage is that:
Show answer and working
Answer: A. Ohm's Law describes the relationship between voltage, current, and resistance and has many practical uses in electrical work.. The passage explains Ohm's Law and its practical consequences.
Question 38
If a technician keeps voltage fixed and the resistance in a circuit suddenly drops far below what is expected, the passage suggests the most likely cause is:
Show answer and working
Answer: B. A partial short or degraded insulation allowing excessive current.. The passage links higher-than-expected current to lower-than-expected resistance such as a partial short.
Question 39
According to the passage, Ohm's Law is most simply expressed as which formula?
Show answer and working
Answer: D. V equals I times R.. The passage states V equals I times R.
Passage 2: read it, then answer questions 40 to 45.
Journeyman electricians who pursue continuing education often encounter two contrasting paths: master electrician licensure and specialty certifications. Master licensure typically requires several additional years of experience beyond journeyman status, a comprehensive examination covering the full National Electrical Code, and in some jurisdictions a supervised business-law component. The master license is broad and portable, permitting the holder to pull permits, supervise crews on new construction, and operate as a contractor. Specialty certifications, by contrast, focus on a narrow domain such as photovoltaic installation, motor controls, or fiber optic cabling. These certifications usually require shorter training cycles and are awarded by industry bodies rather than state licensing boards. For an electrician weighing the two, the trade-off is clear. Master licensure opens the broadest set of legal activities and is essentially mandatory for anyone planning to run a contracting business. Specialty certifications, while narrower, signal expertise in a growing market segment and often command a wage premium without the multi-year commitment. Many working electricians pursue a specialty first for the near-term earnings boost, then later undertake master licensure if their career direction shifts toward management or ownership.
Question 40
According to the passage, master licensure typically requires which of the following beyond journeyman status?
Show answer and working
Answer: C. Additional years of experience, a full National Electrical Code exam, and sometimes a business-law component.. The passage lists these as the master licensure requirements.
Question 41
The author's primary purpose in the last sentence is to:
Show answer and working
Answer: E. Explain a common career sequence in which a specialty is pursued first for earnings and master licensure later for management.. The closing sentence describes a typical path and the reasoning behind it.
Question 42
The main idea of the passage is that:
Show answer and working
Answer: B. Electricians weighing continuing education face a trade-off between broad master licensure and narrower specialty certifications.. The passage contrasts the two paths and the trade-off between them.
Question 43
The word 'portable' in the passage most nearly means:
Show answer and working
Answer: C. Recognized and accepted across different jurisdictions or employers.. Here 'portable' means the credential is widely accepted.
Question 44
It can be inferred that an electrician whose long-term goal is to own a contracting firm would most likely:
Show answer and working
Answer: B. Eventually pursue master licensure, since it is essentially mandatory for running a contracting business.. The passage says master licensure is essentially mandatory for anyone planning to run a contracting business.
Question 45
Which of the following is NOT listed in the passage as a specialty certification domain?
Show answer and working
Answer: E. High-voltage substation maintenance.. High-voltage substations is not mentioned among the specialties.
Passage 3: read it, then answer questions 46 to 51.
Electrical circuits are commonly arranged in two fundamental configurations: series and parallel. In a series circuit, all components are connected end-to-end along a single path, so the same current flows through every component. The total resistance is simply the sum of the individual resistances, and if any one component fails open, the entire circuit stops conducting. Series wiring is therefore risky for most power applications, which is why a single burned-out bulb can darken an older string of holiday lights. In a parallel circuit, each component is connected across the same two points, so each experiences the full source voltage while drawing only the current its own resistance permits. Total current is the sum of the branch currents, and the equivalent resistance is always less than the smallest individual resistor. The defining advantage of parallel wiring is reliability: if one branch opens, the others continue to operate. This is why modern home wiring is parallel, allowing every outlet and light to work independently. The trade-off is that adding more branches increases total current draw, which is why circuits are protected by breakers sized to the ampacity of the wiring.
Question 46
It can be inferred that the older strings of holiday lights described in the passage were wired in series because:
Show answer and working
Answer: E. When one bulb burned out, the entire string went dark, the defining weakness of a series circuit.. A single burned-out bulb darkening the whole string is the series-circuit failure mode the passage describes.
Question 47
Which of the following is NOT true, according to the passage?
Show answer and working
Answer: A. The equivalent resistance of parallel resistors is greater than the largest individual resistor.. The passage states the equivalent resistance is less than, not greater than, the smallest individual resistor.
Question 48
The main idea of the passage is that:
Show answer and working
Answer: C. Series and parallel circuits differ in reliability and behavior, which is why most modern wiring is parallel.. The passage contrasts the two configurations and explains why parallel wiring is standard in homes.
Question 49
The word 'approach' in 'approach boundaries' (used elsewhere in this pool) or 'open' in 'fails open' most nearly means, in this passage:
Show answer and working
Answer: A. Broken so that the conducting path is interrupted.. 'Fails open' means the component breaks the circuit path.
Question 50
According to the passage, what happens in a series circuit if one component fails open?
Show answer and working
Answer: C. The entire circuit stops conducting.. A series circuit requires a complete path through every component.
Question 51
The author's primary purpose in the passage is to:
Show answer and working
Answer: C. Explain the two fundamental circuit configurations and the practical reason parallel wiring is preferred for homes.. The passage explains both configurations and the reliability advantage of parallel wiring.
Passage 4: read it, then answer questions 52 to 57.
The modern electrical grid depends on a careful balance between supply and demand. Operators at regional control centers monitor power flow across thousands of miles of transmission lines, making adjustments in real time. When demand surges, such as on a hot afternoon when air conditioners run simultaneously, operators must bring additional generation online within minutes. Failure to match supply with demand can cause frequency to drift outside the narrow 59.5 to 60.5 hertz range that North American equipment requires. Persistent frequency deviation damages turbines and trips protective relays, potentially cascading into widespread outages. To prevent this, grid operators rely on spinning reserve, which is generation already running below full capacity and ready to ramp up quickly. They also coordinate with neighboring utilities through reliability coordinators, exchanging power across tie-lines when local resources run short. The 2003 Northeast blackout, which affected 55 million people, began when a line in Ohio sagged into overgrown trees on a hot day, and alarm software at the local control room failed to alert operators to the cascading trip. Since then, tree-trimming standards and situational awareness tools have been tightened significantly.
Question 52
The author mentions hot afternoons with air conditioners running simultaneously primarily to:
Show answer and working
Answer: C. Give a familiar example of a moment when demand surges and extra generation is needed quickly.. The example illustrates a demand surge that operators must meet.
Question 53
The word 'cascading' in the passage most nearly means:
Show answer and working
Answer: A. Spreading rapidly in a chain from one event to the next.. 'Cascading' here describes a chain reaction spreading through the system.
Question 54
The main idea of the passage is that:
Show answer and working
Answer: E. Grid operators must continuously balance supply and demand to prevent outages.. The passage centers on the balancing act grid operators perform.
Question 55
Which of the following is NOT supported by the passage?
Show answer and working
Answer: D. The 2003 blackout was triggered by a cyberattack on Ohio control rooms.. The passage blames a sagging line and an alarm failure, not a cyberattack.
Question 56
It can be inferred from the passage that if a control center's alarm software had worked correctly in 2003, the blackout most likely:
Show answer and working
Answer: D. Might have been prevented or limited because operators could have responded to the cascading trip.. The passage implies the failed alarm software denied operators the chance to react in time.
Question 57
According to the passage, North American equipment requires frequency to remain within what range?
Show answer and working
Answer: A. 59.5 to 60.5 hertz.. The passage states 59.5 to 60.5 hertz.
Passage 5: read it, then answer questions 58 to 63.
Grounding and bonding are two terms that apprentices frequently confuse, yet they serve distinct safety functions. Grounding means connecting a circuit, usually the neutral, to the earth or to a grounding electrode such as a driven rod, establishing a reference for system voltage and giving lightning and surges a path into the earth. Bonding means mechanically connecting the metal enclosures, raceways, and other non-current-carrying parts together so that they are at the same voltage, eliminating differences that could give a shock. The two work together during a fault. If a live wire accidentally contacts a metal box, bonding ensures the box is tied to the equipment grounding conductor, which in turn is grounded at the service. This creates a low-resistance path that allows a large fault current to flow, immediately tripping the breaker and removing the danger. Without bonding, a metal case could remain energized at line voltage with no current flowing, which would not trip the breaker but could kill anyone who touched it. The key insight is that the breaker does not trip because someone is being shocked; it trips because bonding turned the fault into a short circuit large enough to operate the overcurrent device.
Question 58
It can be inferred that a metal case left unbonded and accidentally contacted by a live wire would:
Show answer and working
Answer: D. Probably NOT trip the breaker, since little fault current would flow, leaving the case energized and dangerous.. Without bonding, too little current flows to operate the overcurrent device, so the breaker does not trip.
Question 59
The author's primary purpose in the last sentence is to:
Show answer and working
Answer: E. Correct the misconception that a breaker trips because someone is being shocked, by explaining it actually trips on overcurrent created by bonding.. The last sentence states the breaker trips on overcurrent, not on a person being shocked.
Question 60
The main idea of the passage is that:
Show answer and working
Answer: E. Grounding and bonding serve distinct but cooperating safety functions, and bonding is what allows a breaker to trip during a fault.. The passage distinguishes the two and shows how they work together during a fault.
Question 61
Which of the following is NOT supported by the passage?
Show answer and working
Answer: A. A breaker trips primarily because a person is being shocked, before any overcurrent flows.. The passage explicitly states the breaker does not trip because someone is being shocked; it trips on overcurrent.
Question 62
According to the passage, which of the following is given as an example of a grounding electrode?
Show answer and working
Answer: C. A driven rod.. The passage names a driven rod as a grounding electrode.
Question 63
The word 'mechanically' in 'mechanically connecting the metal enclosures' most nearly means:
Show answer and working
Answer: B. By physical fasteners joining the metal parts together.. 'Mechanically' here means physically joined with hardware.
Passage 6: read it, then answer questions 64 to 69.
Electrical workers face two persistent hazards: unexpected re-energization of equipment they are servicing, and arc flash, the explosive release of energy caused by a short-circuit arc. The standard defense against the first hazard is lockout/tagout, a procedure in which a circuit is de-energized, tested to confirm the absence of voltage, and locked with a padlock that only the working technician holds. Each worker applies a personal lock, and no lock may be removed by anyone other than its owner, ensuring that equipment cannot be re-energized while someone is still working on it. The defense against arc flash is more layered. Because an arc can produce temperatures hotter than the surface of the sun, shrapnel, blinding light, and a pressure wave capable of throwing a worker across a room, employers must first attempt to de-energize equipment so that work can be done in an electrically safe condition. When energized work is unavoidable, workers must wear flame-resistant clothing rated to the incident energy at that location, use insulated tools, and maintain approach boundaries calculated from a flash hazard analysis. Simply wearing gloves is not enough; the category of personal protective equipment must match the available energy, which is why labels on modern equipment display the required level of gear.
Question 64
According to the passage, an arc flash can reach temperatures:
Show answer and working
Answer: D. Hotter than the surface of the sun.. The passage explicitly compares arc temperature to the sun's surface.
Question 65
It can be inferred that a rule forbidding anyone other than the owner to remove a personal lock exists primarily to:
Show answer and working
Answer: C. Guarantee that no one can restore power while the technician who applied the lock is still working on the equipment.. Personal locks ensure equipment cannot be re-energized while someone is still working on it.
Question 66
The author mentions labels on modern equipment that display the required level of gear in order to:
Show answer and working
Answer: E. Show that PPE requirements vary with the incident energy available at each specific location.. The labels exist because the required PPE category varies with the local incident energy.
Question 67
Which of the following is NOT identified by the passage as adequate protection against arc flash on its own?
Show answer and working
Answer: D. Simply wearing gloves, regardless of incident energy.. The passage states simply wearing gloves is not enough; the PPE category must match the available energy.
Question 68
The main idea of the passage is that:
Show answer and working
Answer: B. Two distinct electrical hazards, unexpected re-energization and arc flash, each require a specific layered defense.. The passage describes two hazards and the distinct defenses for each.
Question 69
The phrase 'electrically safe condition' in the passage most nearly refers to a state in which:
Show answer and working
Answer: D. The equipment has been de-energized so that work can be done without live exposure.. The passage contrasts an electrically safe condition with energized work.
How to get the most out of this practice test
First attempt in exam mode. Sit somewhere quiet, set your phone aside and use paper for working. Your first score shows where you really stand.
Read the section breakdown. The results table splits your score into algebra and reading, so you know which to study first.
Review every wrong answer. After you finish, every answer opens in place with its working. Then redo the question on paper without looking.
Fix the method, not the question. If you missed a function question with a negative input, practice that skill using the algebra guide before you retest.
Second attempt in a week or two, again in exam mode, to check your timing as well as your accuracy.
About these questions
The 33 algebra questions were written for this site and each answer is checked by computing it independently, so a wrong answer key cannot slip through. The reading passages cover technical and work topics similar to the real test, such as Ohm's law, circuit types and arc flash safety. The real reading passages differ, but the question types (main idea, detail, word meaning, inference, purpose and NOT questions) are the same.
The 97-minute exam timer matches the combined limits of the real sections (46 plus 51 minutes). On test day the two sections are timed separately with a short break, so pace yourself to reach the reading section with at least 50 minutes left.
Frequently asked questions
Is this the real electrical aptitude test?
No. These are practice questions written in the same format and at a similar level: 33 algebra and functions questions and 36 reading comprehension questions. Real test questions are confidential and are not published by the Electrical Training Alliance.
What score on this practice test means I am ready?
There is no official conversion. A practical target is to finish both sections inside the time limit and get most questions right, then review every miss until you understand the method. Consistency across two attempts matters more than one high score.
Can I pause the test?
Exam mode keeps running until you finish or time runs out, like the real test, which has no pause. If you only want to study, use study mode or open the answers one question at a time.